Bike Fit with gebioMized Saddle Pressure Mapping Can Improve Your Interaction with the Bike

 

 

PT Bike Fit Logo

 

Pressure Map 2

gebioMized_logo

gebioMized Saddle Pressure Mapping provides the fitter and client a way to visualize the way a rider is positioned and interacting with the saddle.  Previously, without this technology,  this type of analysis is left to visual observation from the fitter and any feedback the rider is able to give regarding their sensations.  The pressure mat is now giving us the oppurtunity to visualize with greater clarity the riders posture and interaction with the saddle.  This has direct influence then on the quality of a riders pedaling kinematics.

Pressure mapping provides important feedback with regard to:

  • Saddle selection and width
  • Saddle position including height and fore aft
  • Crank length
  • Leg length discrepancy
  • Validating and providing evidence for recommendations made during the fit

Here are a few examples:

Below is a rider who was dealing with left lateral knee pain.  The red line you see on the image is the line of regression or axis of movement.  You can see from the image on the left this rider is rotated back and to the left placing strain on the IT band and lateral hamstring tendons.  Improvements were made through changes in the saddle hieght, for aft and a different shape saddle was selected with the same width.  A more symmetrical movement of the pelvis was achieved indicated by the more horizontal red line, and a more even positioning on the saddle.  The end result being a decreased pull and strain on the tendons on the lateral aspect of the leg.

MM 4.28.19

 

This example below is a rider with no specific pain complaints but has sensations of an assymetrical pedal stroke and is constantly shifting around on the saddle in an attempt to find a stable point.  Modifications to the saddle position were made, stance width was modified, a wider saddle was selected and a different shape utilized.  This rider also has a leg length discrepency.  There are ways to minimize leg length differences on the bike but with SPD style pedals, the cleat/pedal interface does not tolerate using much more than 1 or 2 mm of shims before the shoe/pedal interface becomes unstable. In this case, a compromise must be made between the reach of the different legs.  You can see from the picture the rider has improved symmetry and more symmetrical contact with the saddle.  Visually this was shown by a more stable appearance on the bike with a dramatic decrease in rocking of the pelvis during the pedal cycle.

Hess Gale 4.28.19

 

 

ISM saddles certainly have a unique pressure mapping profile.  These saddles are often used by triathletes and road riders for their pressure relief benefits when in the low and forward position found on a time trial bike.  This rider came in with complaints of right hip pain.  You can see the pressure bias is certainly heavy on the right.  There were several biomechanical and position factors contributing to the symptoms.  These included leg length discrepency and a natural toe out posture which was addressed with cleat positioning.  The same saddle was maintained but the position modified to a more appropriate height and offset.  This combined with cleat and saddle adjustments and the rider achieved a more neutral position on the saddle and a more smooth pedal stroke.

Barbour Adam 4.27

 

Another example illustrates how pressure mapping can provide eyes on the saddle to provide insight into where a rider is placed on the saddle.  This image on the left shows the rider shifted far forward on the saddle and rotated forward on the left side. Keeping the same saddle and modifying the position allowed this rider to sit more symmetrically on the saddle with decreased rotation of the pelvis.  These rotations and assymetries can lead to improper muscle firing patterns and recruitment contributing to different patellofemoral pain syndromes and tendonits.

 

Pressure Map Ammons

 

Appointments can be made for full Personalized Bike Fits or shorter Saddle Demo and selection appointments using the gebioMized pressure mapping system.

 

Contact PTBF Button copy

 

 

Advertisements

How to Accurately Measure Saddle Position – Part II – Fore/Aft

PT Bike Fit Logo for AVERY 1.75 file green

To follow up on how to consistently reproduce your saddle position time after time, I would be remiss if I did not address fore/aft position.  Saddle position, much like your handlebar position, is measured in two planes.  The X (horizontal) and Y (vertical).  Both these measures are taken from one central landmark on the bike, your bottom bracket.

Here are two way to accurately measure your fore/aft position and make documenting and reproducing your saddle position reliable and consistent.

The first method is with a traditional weighted line.  Here you will have your bike off the trainer with the line going right over the tip of the saddle. The line should be long enough to drop past the chainstays and bottom bracket.

_SR23754 web

PRO TIP:  You will want to tip your bike slightly toward you to allow the weighted line to hang freely without interference from the frame or cables.  Cyclocross and Mountain Bikes in particular tend to have wider top tubes and stays which can interfere with the path of your line.

Take a ruler or tape measure and align it with the center of your bottom bracket.  Let the weighted line settle to a consistent point.

_SR23755 web

There is your fore/aft position! 9.1 cm is the example used in this post.

The second method will give you the same result without having to remove the bike from the trainer.  Most people I know will not pass up the opportunity to play with lasers.  Cats like lasers, kids like lasers, DIY homeowners like lasers, and bike fitters are no different.  We love lasers! and use them any time we can to get an accurate straight line assessment.

Line up your laser with the center of your bottom bracket.  I have made it a habit of using the non drive side because there are many cranks without a good center point on the drive side.

_SR23749 web

 

Take your tape measure and line it up on the tip of the saddle

_SR23752 web

That’s it!  9.1cm is the number in this example.

You are all set to get your saddle dialed in after any maintenance, changes in seatpost, and to replicate your position on a similar style bike with the same saddle.

 

Contact PTBF Button copy

ptbikefitllc.com